Birthdate

26.05.1956

Organization

Powder Metallurgy Institute, State Scientific Institution

Position

Director

Research specialization

Research area

Others

Research specialization

Investigations and design of new materials in the field of powder metallurgy and ceramics, composite, nano-size and super hard materials, protective coatings, welding, including with use of dynamic and pulse methods of load. Production of construction, tribotechnical and special materials and articles from them; materials and articles for electrical engineering and radio-electronics, technical ceramics, tools on the base of superhard materials, natural and artificial diamonds; porous filtering and capillary-porous materials, articles on their base; materials and technologies of implants production; materials and technologies of friction coating s deposition; devices and equipment for investigation and control of structure and properties of materials. Metallographic investigations, mechanical tests, chemical analysis, and indestructible control, tests of equipment and products of welding; certification of uniform welding production, materials, equipment and welding production. Design of quality control system in welding production; training, post-training attestation of welders, operators of plasma cutting, contact welding, operators of heat treatment and of indestructible control by national and international standards; certification of welding production specialists and indestructible control. Design of electrical arc welding, ultrasonic, gas-flame equipment, control systems and means for mechanization and automation of welding production. Design of software for automation of welding processes, defectoscopy and quality control in welding. Welding by explosion of bi-metallic and multi-layer compositions of metals and alloys. Detonation synthesis and percussion-wave consolidation of nano-structure powders of superhard and diamond-like materials. Demolition by explosion of constructions and buildings, utilization military purpose articles. Punching by explosion of great-sized parts from sheet materials. Pulse treatment of ceramic and metal materials. Manufacturing of articles from superhard and refractory powders, hydraulic pressing.

Career

2009 — Corresponding member of the National Academy of Sciences of Belarus
2005–present — General Director of State Research and Production Powder Metallurgy Association (SRP PMA) NAS of Belarus – Director of State Scientific Institution “Powder Metallurgy Institute” (SSI PMI) .
2001 — Professor, recipient of State Prize of the Republic of Belarus
1998 — Doctor of Engineering
1997–present — member of American Society of Materials – ASM (ASM ID 262841), member of Belarusian Republican Foundation for Fundamental Research Council, member of Belarusian National Technical University State Examination Board, member of European Powder Metallurgy Association (EPMA).
1997-2005 — Director of State Scientific Institution “Powder Metallurgy Institute” (SSI PMI) .
1993-1997 — Head of the Department of Powder Metallurgy Protective Coatings Scientific Research Laboratory with pilot production, Minsk
1991-1992 — Scientific training in Aachen Technical University (Germany)
1986-1993 — Head of Powder Metallurgy Plasma Spraying Scientific Research Laboratory with pilot production, Minsk
1981-1986 — Head of plasma coatings group of Powder Metallurgy Scientific Research Laboratory with pilot production, Minsk
1982 — inventor of the USSR
1981-1985 — PhD student, National Academy of Sciences of Belarus
1978-1981— Engineer of the Powder Metallurgy Scientific Research Laboratory with pilot production (since 2002 - State Scientific Institution “Powder Metallurgy Institute” (SSI PMI), Minsk)
1973-1978 — MSc of the Belarusian Polytechnic Institute (now-Belarusian National Technical University).

Scientific activities

Projects

• European FP6 Project COOP-CT-2006 «Nanostructured Thermally Sprayed Magnetic Coatings FOR Microwave Absorption Applications», 2006-2009. (Coordinator Chief Financial Officer David Beeby, University of Nottingham, United Kingdom)
• Participation in the European FP6 Project SES6 «Demonstration of SOFC STACK Technology for operation at 600C», 2006-2009. (Coordinator Chairman of the Board of Directors Antonius Bernardus Maria Hoff, Energy Research Centre of The Netherlands, The Netherlands.

Publications

1.Ilyushchanka A.Ph.,Savich V.V., Syroezhko G.S. (15-17 October 2007). The innovations in the Technology and Manufacture of Components by the methods of powder metallurgy. EURO PM 2007. International Powder Metallurgy Congress Et Exhibition . Vol 3. – P.39-44.

2. Vityaz P.A., Ilyushchanka A.Ph., Belyaev A.V., Kusin R.A., Kaptsevich V.M. (15-17 October 2007). Powder filtering Material with a gradient structure produced by synthesis-sintering Method.EURO PM 2007. International Powder Metallurgy Congress Et Exhibition. Vol 2. – P.359-361.

3. Ilyushchanka A.,Talaka T.,Letsko A.,Hasak T. (2007). Structure and Properties and MASHS Titanium Aluminide-Based Powder Alloyed with Chromium. Progress in Powder Metallurgy: Materials Forum. Vols. 534-536, pp. 1589-1592.

4. Kulik V.I., Nilov A.S., Garshin A.P., Ilyushchanka A.Ph., Savich V.V., Shipitsa N.A., Dmitrovich A.A. (10-13 September, 2007). Cf/SiC-Composites for Fric-tional Applications Produced by the Liquid Silicon Infiltration Process.European Congress and Exhibition on Advanced Materials and Processes. Nordberg, Germany.

5. Fedotova J., Bonnet G., Pedraza F., Balmain J., Dubois S., Gauthier V., Denanot M.F., Ouabadi N., Ilyushchanka A., Letsko A., Akimov A. (2008). Effect of lamellar micro-structure on oxidation kinetics of Fe3Al sintered by hot isostatic pressing.Corrosion Science. №50. – P.1693-1700.

6. Ilyushchanka A., Belyayev A., Talako T., Letsko A., Borovik D. (29th September–1st October 2008). Multicomponent Composite Powders Synthesis for Gas-Thermal Spray of Protective Coatings.EURO PM 2008 Proceedings: Materials of International Congress ( Mannheim, Germany). Vol.2. – Shrewsbury: EPMA.- P.61-67.

7. Ilyushchanka A., Savich V., Syroezhko G. Powder Metallurgy of Belarus Science and Production.(29th September–1st October 2008). EURO PM 2008 Proceedings: Materials of International Congress ( Mannheim, Germany). Vol.2. – Shrewsbury: EPMA.- P.67-72.

8. Ilyushchanka A., Sudnik L. (29th September–1st October 2008). Nanostructured Ceramic Materials.EURO PM 2008 Proceedings: Materials of International Congress ( Mannheim, Germany). Vol.2. – Shrewsbury: EPMA.- P.345-350.

9. Ilyushchanka A., Ulyanova T., Titova L.,Krutko N.Shauchonak A.Barai S. (14th-18th September, 2009). Influence of impact pressure on a structure and properties of AL2O3-ZrO2 nanostructured powders in process of ceramic production..E-MRS 2009. Fall meeting (Warsaw University of Technology, Warsaw (Poland), )^ Scientific Programm and Book of Abstracts. – P. 214.

10. Ilyushchanka A., Smorygo O., Mikutski V., Marukovich A., Vialiuha Y., Mezenceva E. (13 October 2009). Structured catalyst supports and catalyst for the methane indirect internal steam reforming in the intermediate temperature SOFC.ScienceDirect: International journal of hydrogen energy.

11. Ilyushchanka A., Talako T., McCartney G., Zhang D., Yellup J., Brűhl M., Bobzin K., Well C., Linden I. (2009). Development of NiZn-Ferrite Coatings for Electromagnetics Applications.Thermal Spray Bulletin. – . – №2. – Р.126-132.

12. Ilyushchanka A., Talako T., Letsko A. (2009). SHS Powders for Thermal Spray Coating.KONA Powder and Particle Journal. №27. – Р. 55-72.

13. Ilyushchanka A., Shevtsov A., Okovity V., Astashinsky V., Chivel.Yu. (20 December 2009). Wear-resistant coatings by pulsed plasma processing of thermal sprayed powders.Journal of Thermal Spray Technology. – P.1-13.

14. Ilyushchanka A., Letsko A.I., Talako T.L., Grigoreva T.F., Tsybulya S.V., Vorsina I.A., Lyakhov N.Z. (July 25-30, 2010). The optimization of composition, structure and properties of metals, oxides, composites, nano- and amorphous materials.Materials of Ninth Israeli-russian bi-national workshop. Belokurikha. – P.89-103.

15. Vityaz P.A., Ilyushchanka A.Ph., Pilinevich L.P., Prokhorov O.A., Schelekhina V.M. (11th – 14th October 2010). Submicrometer Pore Size Multilayer Ceramic Membrane Filters. World PM 2010 Proceedings: Materials of International Congress. Florence, Italy. Vol.4. – P.167–171.

16. Vityaz P.A., Ilyushchanka A.Ph., Sudnik L.V., Baray S.G. (11th – 14th October 2010). Structure and Technology Adjustment for Physical and Mechanical Properties of Composites on the Base of Ceramic Nanopowders. World PM 2010 Proceedings: Materials of International Congress. Florence, Italy. Vol.4. – P.335-340.

17. Ilyushchanka A., Talako T., Letsko A., Grigorieva T., Lyakhov N., Barinova A, Yakovleva M. (11th – 14th October 2010). Nanocomposite SHS Powders Produced Using Mechanocomposite-Precursors. World PM 2010 Proceedings: Materials of International Congress. Florence, Italy. Vol.4. – P.181-186.

18. Ilyushchanka A., Smorygo O., Mikutski V., Marykovich A., Sadykov V., Smirnova A. (2011). An inverted sphrerical model of an open-cell foam structure. Acta materialia: Science Direct. – – №59. – P.2669-2678.

19. Formanek B., Szymansky K., Letsko A., Talako T. (September 29-30, 2010). New intermetallic-ceramic powders and thermally sprayed coatings for power energy industry application. New materials and technologies: Powder Metallurgy,composite materials, protective coatings, welding. Abstracts of 9th International scientific and technical Conference. Мinsk.: Powder Metallurgy Institute. P.174-175.

20. Ilyushchanka A.Ph., Doktorov V.V., Maziuk V.V., Rak A.L. (2011). Miniature loop heat pipes with capillary structure. Porous permeable materials: technologies and products based on them: Abstracts of 4th International Symposium. Мinsk.: Powder Metallurgy Institute. – P.202-210.

21. Ilyushchanka A.Ph., Doktorov V.V., Maziuk V.V., Rak A.L. (2011). Development of miniature loop heat pipes with noninverted meniscus powder capillary structure. Powder Metallurgy: Republic Interdepartmental edited volume. Issue 34. – P.149-153.

ETC.

Patents

1. 2008 "Method of forming wear-resistant and corrosion-resistant coatings";
2. 2008 "Method of producing two-layer porous powder materials";
3. 2008 "Method of producing powder material based on titanium aluminides";
4. 2008 "Method of producing sputtering targets for thin film deposition";
5. 2008 "Technology for metal coating deposition";
6. 2008 "Stand for friction disks testing";
7.2008 "Method of biocompatible coatings flame application";
8. 2008 "Method of applying double-wall heat-resistant coating";
9. 2008 "Method of producing iron powder";
10. 2008 "Biotransplant based on ceramic foam carriers of zirconium oxide - aluminum oxide system and multipotent stromal cells of human bone marrow for elimination of extensive bone defects and the method of its manufacture";
11. 2009 "Method of producing composite ceramic material for hardfacing";
12. 2009 "The porous structure of the prosthetic implant";
13. 2010 "Prosthetic vertebral body with the possibility of distraction in spinal motion segment";
14. 2010 "Method of abrasive tools production and working mixture for their manufacture";
15. 2010 "Method of producing multicomponent granules of heterogeneous powders";
16. 2011 "Method of shock-wave activation of powders";
17. 2011 "Method of producing porous two-layer thin-walled tubular powder products";
18. 2011 "Mullite ceramics";
19. 2011 "Method of producing resistive targets".

Contact data

Programs EWISCO, SINMATICS-LANL, INTAS, COPERNICUS, FP7